Testing and Troubleshooting the Octel 50 System
Using the Command Line Interface
The Command Line feature provides an interface for you to enter system operation
commands while the Octel 50 system is running. The available commands enable you to
perform a number of functions, including copying files, disabling and enabling ports, and
enabling the debug feature.
Opening and Closing the Command Line Interface
Use the following procedures to open and close the Command Line interface.
To open the Command Line interface:
1. Press <ESC> to close the active display and active the menu bar.
2. Select Command Line from the Display menu.
To close the Command Line interface:
1. Press <ESC> to close the active display and active the menu bar.
2. Reselect Command Line from the Display menu.
Closing Business Hours
Use the following procedure to immediately terminate any active business hours.
To close business hours:
1. Press <ESC> to close the active display and active the menu bar.
2. Select Command Line from the Display menu.
3. From the Command Line, type
The system resets at midnight to normal hours.
Opening Business Hours
Use the following procedure to immediately activate business hours.
To open business hours:
1. Press <ESC> to close the active display and active the menu bar.
2. Select Command Line from the Display menu.
3. From the Command Line, type
The system resets at midnight to normal hours.
O
50 I
G
CTEL
NSTALLATION
UIDE
Using the Command Line Interface
then press <ENTER>.
CLOSED
then press <ENTER>.
OPEN
13-42