Avaya Octel 50 Installation Manual page 141

Setting Up the System
If Set Too High
If Set Too Low
Min
Inband Code for Busy Extension - #151
Location of
Mailbox Number
When/How to Use
Related Parameters/Features
If Set Too High
If Set Too Low
Min
Inband Code for Busy Extension - #152
Start at End of
String
When/How to Use
Related Parameters/Features
If Set Too High
If Set Too Low
Min
Octel 50 Installation Guide
Max Default
0 32 Blank
Max Default
1 99 1
Max Default
– – No
Configuring System Setup Parameters
Not applicable.
Not applicable.
Requires
Restart Dependent
No
This parameter specifies which digit in the string for Busy
Extension is the first digit in the mailbox number that follows
the code.
The setting of this parameter depends on whether the count
starts from the beginning or the end of the string.
The Location of Mailbox Number and the Start at the End of
String parameters work together. For example, if the
incoming string is 9*1123 and the mailbox number is 123,
the Number of DID Digits to use is 6, the DID Code is 9*1,
the Location of Inband Signaling Code is 1, and, if Start at
End of String is set to Yes, the Location of Mailbox Number
is 3. If Start at End of String is set to No, the Location of
Mailbox Number is set to 4.
Not applicable.
Not applicable.
Requires
Restart Dependent
No
This parameter specifies whether the system starts at the
end of the inband signaling string for Busy Extension when
counting digits to locate the start of the mailbox number.
Enable this parameter if variable-length strings are used.
The Location of Mailbox Number and the Start at the End of
String parameters work together. For example, if the
incoming string is 9*1123 and the mailbox number is 123,
the Number of DID Digits to use is 6, the DID Code is 9*1,
the Location of Inband Signaling Code is 1, and, if Start at
End of String is set to Yes, the Location of Mailbox Number
is 3. If Start at End of String is set to No, the Location of
Mailbox Number is set to 4.
Not applicable.
Not applicable.
Requires
Restart Dependent
No
Switch- Set by
Integrator
Yes Yes
Switch- Set by
Integrator
No No
Switch- Set by
Integrator
No No
8-81