Message Timing Parameters - Avaya Octel 50 Installation Manual

Setting Up the System
If Set Too Low
0000
(12:00
Time/Date Parameters - #21
Start of Evening
Hours
When/How to Use
Related Parameters/Features
If Set Too High
If Set Too Low
0000
(12:00
Time/Date Parameters - #22
Enable Chinese
Date

Message Timing Parameters

The Message Timing parameters control the message playback features and the
maximum allowed lengths of message and prompt recordings.
Message Timing Parameters - #23
Number of
Seconds to
Rewind Message
Octel 50 Installation Guide
Min Max Default
2359 600
) (11:59 (6:00
AM PM)
Min Max Default
1800
2359
(6:00
) (11:59
AM PM)
Configuring System Setup Parameters
Not applicable.
Requires
Restart
No
)
AM
This parameter defines when, during open hours, the
Octel 50 system begins voicing the Evening greeting
identified on the System Prompts dialog box.
If you do not specify an Evening greeting on the System
Prompts dialog box, only the Attendant Menu prompt or, if
no attendant menu is defined, the default prompt is voiced
during evening hours.
Enter the hour and minutes, in military format, that you
want evening hours to begin. Evening hours cannot be set
on a day-by-day basis.
The Start of Morning Hours parameter determines when
the evening hours end.
The Start of Evening Hours parameter must be set later
than the Start of Afternoon Hours parameter.
The Evening greeting is only voiced during the Open
hours set on the Business Hours dialog box. For example,
if you set the Start of Evening Hours to 5:00
the Closed time on the Business Hours dialog box to 9:00
, the Evening greeting voices from 5:00
PM
Not applicable.
Not applicable.
Requires
Restart
No
)
AM
This parameter has been disabled.
This parameter defines the number of seconds a message
rewinds when a subscriber uses the Rewind keypress
when reviewing messages.
Switch- Set by
Dependent Integrator
No No
and set
PM
to 9:00
PM
Switch- Set by
Dependent Integrator
No No
.
PM
8-15