Figure 20: Attaching The Equipment Rack Brackets (Continued); Figure 21: Mounting The Switch In An Equipment Rack - Allied Telesis AT-x510-28GPX Installation Manual

Figure 20. Attaching the Equipment Rack Brackets (Continued)
5. While another person holds the switch in the equipment rack, secure it
using standard equipment rack screws (not provided), as shown in
Figure 21.
Figure 21. Mounting the Switch in an Equipment Rack
Go to Chapter 4, "Cabling the Networking Ports" on page 63, to connect
the network cables to the ports on the switch.
x510 Series Installation Guide for Stand-alone Switches
61