Figure 57: Attaching The Wall/Equipment Rack Brackets To The X330-52Gtx Switch (Continued) - Allied Telesis x330-52GTX Installation Manual

Figure 57. Attaching the Wall/Equipment Rack Brackets to the x330-
Note
If the wall requires pre-drilled holes, such as a concrete wall,
continue with the next step. Otherwise, go to step 8.
4. Have another person hold the switch on the wall at the selected
location for the device while you use a pencil or pen to mark the wall
with the locations of the screw holes in the brackets.
x330 Series Installation Guide for Virtual Chassis Stacking
52GTX Switch (continued)
107