Figure 56: Status Of A Stacking Slot When Vcstack Is Disabled; Figure 57: Status Of A Stacking Slot When Vcstack Is Enabled - Allied Telesis AT-x510-28GPX Installation Manual

Allied telesis x510 series gigabit ethernet switches
Hide thumbs Also See for AT-x510-28GPX:
Table of Contents

Advertisement

Chapter 5: Powering On the Switch
awplus>show interface port1.0.51
Interface port1.0.51
Scope: both
Link is DOWN, administrative state is UP
Thrash-limiting
Status Not Detected, Action learn-disable, Timeout 1(s)
Hardware is Ethernet, address is 0015.774f.ed30
index 5051 metric 1 mru 1500
configured duplex auto, configured speed auto, configured polarity auto
<UP,BROADCAST,MULTICAST>
SNMP link-status traps: Disabled
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 0, bytes 0, multicast packets 0 broadcast packets 0
Time since last state change: 0 days 00:42:49
94
Figure 56. Status of a Stacking Slot When VCStack is Disabled
The switch displays the message in Figure 57 if VCStack is not
disabled, in which case you need to disable it by performing the
commands in "Disabling VCStack" on page 91.
awplus# show interface port1.0.51
%Can't find interface port1.0.51
awplus#
Figure 57. Status of a Stacking Slot When VCStack is Enabled

Advertisement

Table of Contents
loading

Table of Contents