Powering On The Switch - Allied Telesis AT-x510-28GPX Installation Manual

Chapter 5: Powering On the Switch

Powering On the Switch

74
Note
For instructions on powering on the AT-x510-28GSX-80, refer to
"Powering On the DC Powered AT-x510-28GSX-80 Switch" on
page 77.
To power on the switch, connect the power cords to the connectors on the
back panels and to the appropriate power sources. The AT-x510-28GTX,
AT-x510-28GPX, AT-x510-28GSX, AT-x510-52GTX, and
AT-x510-52GPX models have two power supplies with separate
connectors. The AT-x510L-28GT, AT-x510L-28GP, AT-x510L-52GT and
AT-x510L-52GP models have one power supply with one connector.