Figure 48: Switch Initialization Messages (Continued) - Allied Telesis AT-x510-28GPX Installation Manual

Chapter 5: Powering On the Switch
Assigning Active Workload to HA processes:
hsl, nsm, rmond, sflowd, vrrpd, irdpd, lacpd
lldpd, loopprotd, mstpd, authd, epsrd, imi, imiproxyd
Received event network.activated
Loading default configuration
Warning: flash:/default.cfg does not exist, loading factory defaults.
..
done!
Received event network.configured
awplus login:
88
Figure 48. Switch Initialization Messages (Continued)
After the switch has initialized its management software, go to
"Configuring the Switch for Stand-alone Operations" on page 89 to confirm
its ID number.