Figure 57: Attaching The Wall/Equipment Rack Brackets To The Gs970Emx/52 Switch (Continued) - Allied Telesis CentreCOM GS970EMX/52 Installation Manual

Figure 57. Attaching the Wall/Equipment Rack Brackets to the
GS970EMX/52 Switch (continued)
Note
If the wall requires pre-drilled holes, such as a concrete wall,
continue with the next steep. Otherwise, go to step 8.
4. Have another person hold the switch on the concrete wall at the
selected location for the device while you use a pencil or pen to mark
the wall with the locations of the holes in the brackets. Refer to Figure
58 on page 108.
CentreCOM GS970EMX Series Installation Guide for Standalone Switches
107