Figure 28: Installing An Sfp Or Sfp+ Transceiver; Figure 29: Removing The Dust Cover From An Sfp Or Sfp+ Transceiver - Allied Telesis AT-x510-28GPX Installation Manual

x510 Series Installation Guide for Stand-alone Switches
Figure 28. Installing an SFP or SFP+ Transceiver
Note
If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat Step 1 through Step 4
to install the remaining SFP or SFP+ transceivers in the switch.
5. Remove the dust cover from the transceiver, as shown in Figure 29.
Figure 29. Removing the Dust Cover from an SFP or SFP+ Transceiver
71