Figure 25: Positioning The Sfp Handle In The Upright Position; Figure 26: Connecting A Fiber Optic Cable To An Sfp Transceiver - Allied Telesis AT-x510-28GPX Installation Manual

Figure 25. Positioning the SFP Handle in the Upright Position
7. Connect the fiber optic cable to the transceiver, as shown in Figure 26.
The connector on the cable should fit snugly into the port, and the tab
should lock the connector into place.
Figure 26. Connecting a Fiber Optic Cable to an SFP Transceiver
8. Repeat this procedure to install additional transceivers.
x510 Series Installation Guide for Stand-alone Switches
SFP Handle
69