Monitoring The Initialization Processes - Allied Telesis AT-x510-28GPX Installation Manual

x510 Series Installation Guide for Stand-alone Switches

Monitoring the Initialization Processes

It takes about thirty seconds for the switch to initialize its management
software programs and features, and load the default configuration. You
may monitor the progress of the initialization process by watching the
switch ID LED. It displays the number "8" for about the first 15 seconds
and then the number "1."
You may also monitor the bootup sequence by connecting a terminal or
computer that has a terminal emulator program, to the Console port on the
master switch. You will see the messages in Figure 46 on page 86 to
Figure 48 on page 88.
85