Table 6. Leds On The 10/100/1000Base-T Ports On The At-X510-28Gtx, At-X510L-28Gt, At-X510-52Gtx, And At-X510L-52Gt - Allied Telesis AT-x510-28GPX Installation Manual

Chapter 1: Overview
36
Table 6. LEDs on the 10/100/1000Base-T Ports on the AT-x510-28GTX,
AT-x510L-28GT, AT-x510-52GTX, and AT-x510L-52GT
LED State
Solid Green
Flashing
Green
Link/
Activity
Solid Amber
LED
Flashing
Amber
Off
Duplex Green
Mode
Amber
LED
Flashing
Amber
The twisted pair ports on the AT-x510-28GPX, AT-x510L-28GP,
AT-x510-52GPX, and AT-x510L-52GP Switches have two LEDs that
display link, activity and PoE information. The LEDs are shown in Figure
10 on page 37.
Note
The duplex mode information for the ports on the AT-x510-28GPX,
AT-x510L-28GP, AT-x510-52GPX, and AT-x510L-52GP Switches
can be viewed with the management software.
Description
A port has established a 1000 Mbps link to
a network device.
A port is transmitting or receiving data at
1000 Mbps.
A port has established a 10 or 100 Mbps
link to a network device.
A port is transmitting or receiving data at 10
or 100 Mbps.
A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
A port is operating in full-duplex mode.
A port is operating in half-duplex mode at 10
or 100 Mbps. (Half-duplex mode does not
apply to 1000 Mbps operation.)
Collisions are occurring on a port operating
at 10 or 100 Mbps.