Ppog; Ppon - AMX MVP-5200i-GB Instruction Manual

Page Commands (Cont.)

PPOG

Toggle a specific popup page on either a specified page or the current page. If the page name is empty, the current page is used
(see example 2). Toggling refers to the activating/deactivating (On/Off) of a popup page. This command works in the same way
as the 'Toggle Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Example 2:

PPON

Activate a specific popup page to launch on either a specified page or the current page. If the page name is empty, the current
page is used (see example 2). If the popup page is already On, do not re-draw it. This command works in the same way as the
'Show Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Example 2:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
"'PPOG-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
Toggles the popup page 'Popup1' on the Main page from one state to another (On/Off).
SEND_COMMAND Panel,"'PPOG-Popup1'"
Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).
"'PPON-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PPON-Popup1; Main'"
Activates the popup page 'Popup1' on the Main page.
SEND_COMMAND Panel,"'PPON-Popup1'"
Activates the popup page 'Popup1' on the current page.
Programming
85