Ppog; Ppon - AMX NXD-500i Operation/Reference Manual

Programming
Page Commands (Cont.)

PPOG

Toggle a specific popup page on either a specified page or the current page.
• Toggling refers to the activating/deactivating (On/Off) of a popup page.
• If the page name is empty, the current page is used (see example 2).
• This command works in the same way as the 'Toggle Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Toggles the popup page 'Popup1' on the Main page from one state to another (On/Off).
Example 2:
Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).

PPON

Activate a specific popup page to launch on either a specified page or the current page.
• If the page name is empty, the current page is used (see example 2).
• If the popup page is already On, do not re-draw it.
• This command works in the same way as the 'Show Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Activates the popup page 'Popup1' on the Main page.
Example 2:
Activates the popup page 'Popup1' on the current page.
70
"'PPOG-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
SEND_COMMAND Panel,"'PPOG-Popup1'"
"'PPON-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'PPON-Popup1; Main'"
SEND_COMMAND Panel,"'PPON-Popup1'"
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom