Removing All Data From The Touch Panel; Resetting The Touch Panel Settings To Factory Defaults - AMX Modero X-Series G5 Instruction Manual

Upgrading Firmware

Removing All Data From The Touch Panel

To reset the touch panel to its factory defaults and remove all data stored in the device:
1.
From the Reset & Update menu, select Factory Data Reset to open the Factory Data Reset window (FIG. 49).
FIG. 49 Factory Data Reset window
2.
To erase all data from the touch panel, click the Reset Device button at the bottom of the window. To return to the
Reset and Update menu without making any changes, select Reset and Update at the top of the window.

Resetting the Touch Panel Settings to Factory Defaults

1.
From the Reset and Update menu, select Reset Settings to open the Reset Settings window (FIG. 50).
FIG. 50 Reset Settings window
2.
To reset the touch panel's settings to factory defaults, click Yes. To return to the Reset and Update menu without
saving any changes, click No.
46 MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels