Phn-Setup-Password; Phn-Setup-Port; Phn-Setup-Proxyaddr; Phn-Setup-Stunaddr - AMX Modero NXD-500i Operation/Reference Manual

Programming
SIP Commands (Cont.)

^PHN-SETUP-PASSWORD

^PHN-SETUP-PORT

^PHN-SETUP-PROXYADDR Sets the IP address for the proxy server.

^PHN-SETUP-STUNADDR

^PHN-SETUP-USERNAME

128
Sets the user password for the proxy server.
Syntax:
"'^PHN-SETUP-PASSWORD,<password>'"
Variable:
password = The password for the user name
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PASSWORD,6003'"
Sets the port number for the proxy server.
Syntax:
"'^PHN-SETUP-PORT,<port>'"
Variable:
port = The port for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PORT,5060'"
Syntax:
"'^PHN-SETUP-PROXYADDR,<IP>'"
Variable:
IP = The IP address for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-
PROXYADDR,192.168.223.111'"
Sets the IP address for the STUN server.
Syntax:
"'^PHN-SETUP-STUNADDR,<IP>'"
Variable:
IP = The IP address for the STUN server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-
STUNADDR,192.168.223.111'"
Sets the user name for authentication with the proxy server.
Syntax:
"'^PHN-SETUP-USERNAME,<username>'"
Variable:
username = The user name (usually the phone extension)
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-USERNAME,6003'"
NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom