Escape Sequences - AMX NXD-1000Vi Operation/Reference Manual

^RAF, ^RMF - Embedded Codes (Cont.)
Parameter
file
path
refresh
newest
preserve

Escape Sequences

The ^RAF and ^RMF commands support the replacement of any special escape sequences in the filename
(specified by the %F embedded code) with the corresponding data obtained from the system as outlined in the
table below:
Escape Sequences
Sequence Panel Information
$DV
$SY
$IP
$HN
$MC
$ID
$PX
$PY
$ST
$AC
$AP
$CC
$CP
$LC
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom
Description
Embedded Code
Full path to the location of the file or program that will return the
'%F <file>'
resource. The path must be a valid HTTP URL minus the protocol
and host.
The only exception to this is the inclusion of special escape
sequences and in the case of FTP protocol, regular expressions.
Set Directory path. The path must be a valid HTTP URL minus the
'%A <path>'
protocol, host and filename.
The only exception to this is the inclusion of special escape
sequences and in the case of FTP protocol, regular expressions.
The number of seconds between refreshes in which the resource
'%R <refresh 1-65535>'
is downloaded again. Refreshing a resource causes the button
displaying that resource to refresh also.
The default value is 0 (only download the resource once).
Set the newest file. A value of 1 means that only the most recent
'%N <0-1>'
file matching the pattern is downloaded.
Note: The 'newest file' option only applies to FTP Dynamic
Images, and only those that have pattern matching as part of their
filename. Neither 'newest file' nor pattern matching apply to HTTP
Dynamic Images.
When set, the panel will first pull a list of files matching the given
pattern from the specified FTP server and path. The timestamps
of the items in the list will be compared, with the newest one being
displayed on the panel. This is useful for source devices that
place a uniquely named still image in a folder at constant inter-
vals, allowing the panel always to
display the most recent one.
Set the value of the preserve flag.
'%V <0-1>'
Default is 0. Currently preserve has no function.
Device Number
System Number
IP Address
Host Name
Mac Address
Neuron ID (Only supported on panels that use ICSNet; ignored on all other panels)
X resolution of current panel mode/file
Y resolution of current panel mode/file
Current state
Address code
Address port
Channel code
Channel port
Level code
Programming
183