Battery; Expansion Slots; I/O Connectors - Gateway ALR 8200 Maintaining And Troubleshooting

Hide thumbs Also See for ALR 8200:
Table of Contents

Advertisement

CPU setting jumper
This jumper allows you to set the speed of the processor. Both processors,
in dual processor configurations, must have the same speed rating. If
processors of different speeds are used in the same system, the processors
must run at the speed of the slower processor.

Battery

Provides the power to maintain the CMOS memory when the system is
turned off or unplugged.

Expansion slots

The system features eight expansion slots: five PCI slots, one ISA slot, one
PCI/RAIDport, and one shared PCI/ISA slot.
The PCI bus processes peripheral transactions at a system clock speed of up
to 33 MHz.

I/O connectors

The I/O connectors are located on the back panel of the system. Figure 8
shows the connectors and the table below provides a key to the figure.
Caution!
There is a danger of
explosion if the battery is
incorrectly replaced.
Replace the battery only
with the same or equivalent
type recommended by the
manufacturer. Dispose of
used batteries according to
the manufacturer's
instructions.
Components
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALR 8200 and is the answer not in the manual?

Table of Contents