Table of Contents
Advertisement
3.
Secure the bezel with the screws you removed when removing the
bezel.
Reinstalling the wrap-around panel
1.
Hold the wrap-around panel at a slight angle over the chassis as shown
in Figure 5.
Figure 5: Reinstalling the Wrap-Around Panel
Lower the panel and anchor its top edge to the chassis.
2.
3.
Gently release the panel so that its side is flush against the chassis.
System Access
7
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ALR 8200 and is the answer not in the manual?