Gateway ALR 8200 Maintaining And Troubleshooting page 59

Figure 24: Adding an Expansion Card
7. After seating the card firmly, secure it to the chassis by installing the
screw you removed in Step 5through the mounting bracket at the end
of the card.
Connect cables to the card. (See the card documentation for proper
8.
jumper settings and cable orientation.)
9. Close the case (see page 6 for instructions).
Reconnect the power cord and turn on the system.
10.
It may be necessary to reconfigure your system after installing some
expansion cards. You may also need to install software that came with the
card. Check the card documentation for additional information.
Installing Components 47