Gateway ALR 8200 Maintaining And Troubleshooting page 87

14. Enter BIOS Setup by pressing
in BIOS Setup, press
at the beginning of this process.
If you do not set the CMOS values back to defaults using the
the correct values from your earlier configuration, the system may
function erratically.
You may encounter a CMOS checksum error or other problem after the
system restarts. If so, try turning the system off and then restarting. CMOS
checksum errors require that you enter BIOS Setup, check your settings,
save your settings, and exit setup.
when prompted during startup. Once
F
1
and then re-enter the values you wrote down
F5
key or
F
5
BIOS Setup 75