Table of Contents
Advertisement
44
Maintaining and Troubleshooting the Gateway ALR 8200 Server
5.
Remove the replacement drive from its protective cover and align the
guide rails with the RAID bay guides.
Slide the drive into the bay until the connector makes contact with the
6.
SCA connector on the backplane (see Figure 22).
Figure 22: Installing an SCA Drive
Press the drive in firmly until the connector seats securely. Press the
7.
latches inward until they click into place to seat the drive securely in
the bay.
8.
Close the lower bezel door and lock it.
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ALR 8200 and is the answer not in the manual?