Gateway ALR 8200 Maintaining And Troubleshooting page 109

Error Message
Non-system disk or disk
error.
Not enough memory.
Print queue is full.
Printer is out of paper.
Required parameter
missing.
Syntax error.
Time and date not set.
Update table not found
for CPU xx , Stepping xxxx
Write protect error.
Solutions
Eject the diskette and press E
If the diskette is bootable, check it for errors.
Close all programs that are not currently in
use.
Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to
add memory to the printer.
Add paper to the printer.
Make certain the printer is online.
Make certain you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type exit and press E
Make certain you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type exit and press E
Enter BIOS Setup to set the system's date
and time.
Run the MULOADER utility. A new
processor that was added may not include
the stepping information in the table or the
BIOS may have been flashed and the
stepping information removed from the
table.
Move the write-protection tab over the hole
on the back of the diskette.
.
NTER
.
NTER
.
NTER
Troubleshooting 97