Gateway ALR 8200 Maintaining And Troubleshooting page 108

96 Maintaining and Troubleshooting the Gateway ALR 8200 Server
Error Message
Invalid password.
Keyboard clock line
failure.
Keyboard controller
failure.
Keyboard controller
failure.
Keyboard not detected.
Keyboard stuck key
failure.
Memory errors were
detected while the
system powered up.
Memory size error.
Solutions
Enter your password again, making certain
to enter it correctly.
If you do not know the password, you may
need to reinstall the software you are trying
to access.
Startup passwords are stored in BIOS. If this
password has been set and is unknown, you
may be able to reset the password via
system board jumper settings. See "Setting
system board jumpers" on page 29 for more
information.
Try a working keyboard.
Make certain the keyboard is compatible
with the system. You may have to change
the switch setting to AT.
Replace the keyboard chip.
Try a working keyboard.
Make certain the keyboard is compatible
with the system. You may have to change
the switch setting to AT.
Replace the keyboard chip.
Try a working keyboard.
Make certain the keyboard is compatible
with the system. You may have to change
the switch setting to AT.
Replace the keyboard chip.
See "The keyboard doesn't work." on
page 89.
Turn off the system and check the keyboard
cable.
Remove any objects that may be resting on
the keyboard, and then restart the system.
Check for sticky keys. Clean the keyboard if
necessary.
See "Memory errors were detected during
system start up." on page 83.
Enter BIOS Setup and save the memory
configuration.