Table of Contents
Advertisement
40
Maintaining and Troubleshooting the Gateway ALR 8200 Server
Figure 18: Installing a 5.25-Inch Drive
Secure the drive bracket to the chassis using the screws you removed
10.
in Step 5.
Connect the power and data cables to the back of the drive. (See drive
11.
documentation for proper drive jumper settings and cable orientation.)
Close the case (see page 6 for instructions).
12.
Reconnect the power cord and turn on the system.
13.
14.
Run the configuration software, if required.
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ALR 8200 and is the answer not in the manual?