Gateway ALR 8200 Maintaining And Troubleshooting page 78

66 Maintaining and Troubleshooting the Gateway ALR 8200 Server
•
Serial Port B: options include
• Base I/O Address: displays the base I/O address for
integrated Serial Port B. Using the "+" or "-" key displays the
optional addresses available.
• Interrupt: displays the current interrupt for integrated Serial
Port B. Using the "+" or "-" key displays the optional
addresses available.
•
Parallel Port: options include
• Mode: displays the current parallel port mode. Options
include (Extended Capabilities Port),
ECP
Output only.
• Base I/O Address: displays the base I/O address for the
integrated Parallel Port. Using the "+" or "-" key displays the
optional addresses available.
• Interrupt: displays the current interrupt for the integrated
Parallel Port. Using the "+" or "-" key displays the optional
addresses available.
• DMA Channel: displays the current DMA channel used by
the Parallel Port. Using the "+" or "-" key displays the optional
channels available.
•
Floppy Disk Controller: controls the integrated Floppy Disk
Controller. Options include
• Base I/O Address: options include
and
Enabled, Disabled
and
ENABLED, Disabled
Bi-directional
and
Enable Disable.
or
Primary
.
Auto
.
Auto
and
Secondary.