Gateway ALR 8200 Maintaining And Troubleshooting page 93

Probable Cause
The CD-ROM drive
needs to be added as
new hardware.
The secondary IDE
device may be
disabled.
The CD cables are not
installed correctly.
Solution
From the Control Panel window
Settings | Control Panel),
Follow the directions to add the
Hardware.
drive. If you are not experienced with this
procedure, call Technical Support.
Restart your computer, and then press
enter the setup program. From the
Configuration | Advanced
to
Secondary IDE Interface
certain the
Secondary IDE Status
Open the system and check all cables between
the CD controller and the CD-ROM drive.
(Start |
double-click
Add New
F
to
1
Peripheral
menu, set the
and make
Auto
is
Enabled.
Troubleshooting 81