Power Distribution Units (For Regions Other Than Emea&I); Power Distribution Units (1U); Figure 1.20 Power Distribution Unit (Ac200-240V, 1U, 4 Outlets) - Fujitsu ETERNUS DX60 S3 Operating Instructions Manual

Chapter 1 Component Name/LED Name
1.3 Power Distribution Units (for Regions Other than EMEA&I)
1.3 Power Distribution Units (for Regions Other than EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.3.1

Power Distribution Units (1U)

The 1U power distribution unit has four outlets and two inlets.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)

Figure 1.20 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)

1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
3. Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC
input cable).
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
1
2
3
28
P3AM-9012-01ENZ0