Power Distribution Units (For Regions Other Than Emea&I); Power Distribution Units (1U); Figure 1.28 Power Distribution Unit For Dx80 S2/Dx90 S2 (Ac200-240V, 1U, Max 2 Enclosures Connection) - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 1 Components
1.3 Power Distribution Units (for Regions other than EMEA&I)
1.3 Power Distribution Units (for Regions other than EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.3.1

Power Distribution Units (1U)

The 1U power distribution unit has four outlets and two inlets.
■ Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures
connection)

Figure 1.28 Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures connection)

●
Part explanation
• Outlet (OUTPUT)
This is a socket (IEC60320-C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
• Inlet (INPUT)
This is a socket (IEC60320-C14) for incoming power supply. This socket is used to connect a power cord (AC
input cable).
• Main line switch
This turns on and off the power distribution unit.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Main line switches
Outlets (OUTPUT)
Inlets (INPUT)
29
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0