Power Distribution Units (Only For Regions Other Than Emea&I); Figure 4.10 Power Distribution Unit (Ac200-240V, 1U, 4 Outlets); Table 4.9 Power Distribution Unit (Ac200-240V, 1U, 4 Outlets) And Provided Ac Cable Specifications - Fujitsu ETERNUS DX60 S3 Overview Manual

Chapter 4 Hardware Configurations
4.3 Power Distribution Units (Only for Regions Other than EMEA&I)
4.3 Power Distribution Units (Only for Regions Other than
EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
A power distribution unit is an option to connect power supply units to power outlets when power sockets are
limited.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
There are four outlets and two inlets.

Figure 4.10 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)

1. Inlet (INPUT)
2. Outlet (OUTPUT)
The specifications of a power distribution unit and the AC cables that are provided are shown below.

Table 4.9 Power Distribution Unit (AC200-240V, 1U, 4 Outlets) and Provided AC Cable Specifications

Item
Power
Input cable
1
Voltage
Phase
Frequency
Connection type
Length
Quantity
59
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview
Copyright 2014 FUJITSU LIMITED
2
Specifications
AC 200 – 240V
Single
50Hz/60Hz
IEC60320 C13 n NEMA L6-15P
4m
2
P3AM-8972-01ENZ0