Power Distribution Units (For Regions Other Than Emea&I); Power Distribution Units (1U); Figure 1.39 Power Distribution Unit For Dx100 S3/Dx200 S3 (Ac200-240V, 1U 4Outlets) - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 1 Component Name/LED Name
1.4 Power Distribution Units (for Regions Other than EMEA&I)
1.4 Power Distribution Units (for Regions Other than EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.4.1

Power Distribution Units (1U)

The 1U power distribution unit has four outlets and two inlets.
■
Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 1U 4Outlets)

Figure 1.39 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 1U 4Outlets)

1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
3. Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC
input cable).
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
1
2
3
41
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0