Power Distribution Units (For Regions Other Than Emea&I); Power Distribution Units (1U); Power Distribution Units (2U); Figure 1.27 Power Distribution Unit For Dx80 S2/Dx90 S2 (Ac200-240V, 1U Max 2 Enclosures Connection) - Fujitsu Eternus DX80 S2 User Manual

Chapter 1 Components
1.3 Power Distribution Units (for Regions other than EMEA&I)
1.3 Power Distribution Units (for Regions other than
EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.3.1

Power Distribution Units (1U)

The 1U power distribution unit has four outlets and two inlets.
■
Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U Max 2 enclosures
connection)
Figure 1.27 Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U Max 2 enclosures
●
Part explanation
• Main line switch
This turns on and off the power distribution unit.
• Inlet (INPUT)
This is a socket (IEC60320-C13) for incoming power supply. This socket is used to connect a
power cord (AC input cable).
• Outlet (OUTPUT)
This is a socket (IEC60320-C13) for outgoing power supply. This socket is used to connect a
power cord (AC output cable).
1.3.2

Power Distribution Units (2U)

There are two types of 2U power distribution units: 2U power distribution units that can connect
up to six enclosures and 2U power distribution units that can connect up to eight enclosures.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
connection)
29
Copyright 2012 FUJITSU LIMITED
Main line switches
Outlets (OUTPUT)
Inlets (INPUT)
P3AM-4842-03ENZ0