Setting Up Connection Using WPS PIN Code Mode
If your wireless router supports WPS PIN code mode, generate a PIN code with the machine and register the code to the networking
device.
IMPORTANT
How to operate the wireless router may vary on each device. See the instruction manuals for your networking device for help.
From a Computer
1
Access your wireless router from a computer and display the screen for entering a WPS PIN code.
For more information, see the instruction manuals for your networking device.
From the Operation Panel
2
Press
.
3
Use
/
to select <Network Settings>, and press
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Machine
4
Select <Wireless LAN Settings>, and press
If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>, and press
5
Read the message that is displayed, and press
6
Select <WPS PIN Code Mode>, and press
7
Select <Yes>, and press
A PIN code is generated.
From a Computer
8
Register the generated PIN code to the wireless router.
Register the PIN code on the setup screen displayed in step 1.
The PIN code must be registered within 10 minutes after pressing
NOTE:
If an error message is displayed during setup
Press
and return to step 6.
From the Operation Panel
Downloaded from ManualsPrinter.com Manuals
.
.
.
.
.
in step 7.
0ALJ-07Y
.
Logging on to the
.