Network Settings - Canon MF8580Cdw Manual

Network Settings

NOTE
*
Asterisks ( )
Settings marked with " " are only available for the MF8580Cdw / MF8280Cw.
Settings marked with " " are only available for the MF8580Cdw / MF8550Cdn / MF8540Cdn.
Select Wired/Wireless LAN
Wireless LAN Settings
TCP/IP Settings
SNMP Settings
Dedicated Port Settings
Waiting Time for Connection at Startup
Ethernet Driver Settings
IEEE 802.1X Settings
Initialize Network Settings
Select Wired/Wireless LAN
When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine
from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following <Wireless LAN Settings>).
Selecting Wired LAN or Wireless LAN (MF8580Cdw / MF8280Cw Only)
Wired LAN
Wireless LAN
Wireless LAN Settings
Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the setting for saving
power consumption.
WPS Push Button Mode
Select to automatically configure a wireless connection by using the button on a WPS wireless router.
Using WPS Push Button Mode
WPS PIN Code Mode
Select to configure a wireless connection by entering a PIN code for a WPS wireless router.
PIN Code Mode
SSID Settings
Select to configure a wireless connection by specifying information including an SSID or a network key by inputting manually from
the operation panel.
Select Access Point
Wireless LAN routers that can access the machine are automatically located, so you can select from the list. You must manually
enter a network key, such as a WEP key or a PSK.
Downloaded from ManualsPrinter.com Manuals
All the settings about the network are listed with short descriptions. Default settings are marked with a dagger
( ).
*1
*2
*1
*1
Setting Up Connection by Selecting a Wireless Router
0ALJ-0AW
Setting Up Connection
Setting Up Connection Using WPS