Registering Default Paper Settings for the Manual Feed Slot
You can register default paper settings for the manual feed slot. Registering default settings can save yourself the effort of having to
specify the settings each time you load the same paper into the manual feed slot.
After the default paper setting is registered, the paper setting screen is not displayed when paper is loaded, and the same setting
is always used. If you load a different paper size or type without changing the paper settings, the machine may not print
properly. To avoid this problem, disable the default setting by selecting <Off> in step 3, and then load the paper.
If the <Select Paper> screen shown below is displayed, use
Select <Multi-Purpose Tray>, and press
Select <Set Details>, and press
If <Set Details> cannot be selected, select <On>, press
Select the paper size, and press
Registering a custom paper size
Select <Custom>, and press
Specify the length of the <X> (shorter) side.
Downloaded from ManualsPrinter.com Manuals
to select <Paper Settings>, and press
, and then perform steps 1 and 2 again.