Setting Up Connection Using Wps Pin Code Mode - Canon imageCLASS LBP913w User Manual

Setting Up Connection Using WPS PIN Code Mode

If your wireless router supports WPS PIN code mode, generate a PIN code with the machine and register the code to
the networking device.
● How to operate the wireless router may vary on each device. See the instruction manuals for your
networking device for help.
From a Computer
1
Access your wireless router from a computer and display the screen for entering a
WPS PIN code.
● For more information, see the instruction manuals for your networking device.
From the Operation Panel
2
Select <Menu> in the Home screen.
3
Select <Network Settings>.
● If the screen for entering a PIN appears, enter the correct PIN.
4
Select <Wireless LAN Settings>.
● If the <Direct Connection will be disabled. Is it OK?> message is displayed, select <Yes>.
5
Read the message that is displayed, and select <OK>.
6
Select <WPS PIN Code Mode>.
7
Select <Yes>.
➠
The PIN code is generated and shown on the display.
From a Computer
8
Register the generated PIN code to the wireless router.
● Register the PIN code on the setup screen displayed in step 1.
Setting Up
Home Screen(P. 80)
Setting the System Manager PIN(P. 132)
28
27WS-00J