Connecting via USB
Install the software, and then use a USB cable to connect the machine to the computer. The machine does not come with a USB cable.
Have a cable ready as necessary.
Install the software.
Install the MF Drivers, MF Toolbox, and the other included software. For more information, see MF Driver Installation Guide.
Remove the cap that covers the USB port on the back side of the machine.
Pull the string to remove the cap.
Connect the USB cable.
Connect the flat end (
Connect the square end (
If the dialog box prompting you to install the software is displayed, disconnect the USB cable from the computer, click [Cancel],
and then start from step 1 again.
If you are using MF8580Cdw / MF8550Cdn / MF8280Cw, continue to
Functions (MF8580Cdw / MF8550Cdn / MF8280Cw Only)
If you are using MF8540Cdn / MF8230Cn, the settings for connecting to a computer are complete.
Downloaded from ManualsPrinter.com Manuals
) to the USB port on the computer.
) to the USB port on the machine.
Configuring Initial Settings for Fax