Setting Up Connection by Specifying Detailed Settings
If you want to specify the security settings in detail or cannot establish the wireless connection using the other procedures, manually
enter all the required information for the wireless LAN connection. Before specifying detailed settings, check and write down the required
information, including the SSID, network key, and wireless security protocols (
to select <Network Settings>, and press
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Select <Wireless LAN Settings>, and press
If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>, and press
Read the message that is displayed, and press
Select <SSID Settings>
Enter the SSID that you have written down, and press <Apply>.
Specify the security settings based on the information that you have written down.
If you do not need to specify the security settings, select <None>, and press
Select <WEP>, and press
Select an authentication method, and press
Sets open system authentication, which is also called "open authentication."
Uses the WEP key as a password.
When <Open System> is selected
When connecting to a wireless LAN, the machine experiences an authentication error if the shared key
authentication is set on the wireless router. If this happens, the machine automatically changes the setting to
<Shared Key> and retries the connection.
Select <Edit WEP Key>, and press
Downloaded from ManualsPrinter.com Manuals
Checking the SSID and Network Key).
Logging on to the