Canon MF8580Cdw Manual page 409

Hide thumbs Also See for MF8580Cdw:
Table of Contents

Advertisement

[IPv4 Address: Inbound Filter]
Select to restrict receiving data from the machine to a computer by specifying IPv4 addresses.
[IPv6 Address: Outbound Filter]
Select to restrict sending data from the machine to a computer by specifying IPv6 addresses.
[IPv6 Address: Inbound Filter]
Select to restrict receiving data from the machine to a computer by specifying IPv6 addresses.
5
Specify the settings for packet filtering.
Select the default policy to allow or reject the communication of other devices with the machine, and then specify IP addresses
for exceptions.
1
Select the [Use Filter] check box and click the [Reject] or [Allow] radio button for the [Default Policy].
[Use Filter]
Select the check box to restrict communication. Clear the check box to disable the restriction.
[Default Policy]
Select the precondition to allow or reject the communication of other devices with the machine.
[Reject]
[Allow]
2
Specify address exceptions.
Enter the IP address (or the range of IP addresses) in the [Address to Register] text box and click [Add].
IMPORTANT:
Check for entry errors
If IP addresses are incorrectly entered, you may be unable to access the machine from the Remote UI, in which case you
need to set <IPv4 Address Filter> or <IPv6 Address Filter> to <Off>.
NOTE:
Entry form for IP addresses
Entering a
single address
Specifying a
range of
addresses
Specifying a
range of
addresses with
a prefix
Downloaded from ManualsPrinter.com Manuals
Select to pass communication packets only when they are sent to or received from devices whose
IP addresses are entered in [Exception Addresses]. Communications with other devices are
prohibited.
Select to block communication packets when they are sent to or received from devices whose IP
addresses are entered in [Exception Addresses]. Communications with other devices are
permitted.
IPv4:
Delimit numbers with periods.
IPv6:
Delimit alphanumeric characters with colons.
Insert a hyphen between the addresses.
Enter the address, followed by a slash and a number indicating the
prefix length.
IPv4 Address Filter
Description
IPv6 Address Filter
Example
192.168.0.10
fe80::10
192.168.0.10-
192.168.0.20
192.168.0.32/27
fe80::1234/64

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Mf8280cwMf8550cdnMf8540cdnMf8230cn

Table of Contents