Connection failed. Check the PSK settings.
The network key (PSK) of a wireless router to be connected is not set to the machine correctly.
Check the network key (PSK) of the wireless router, and set it to the machine again.
Checking the SSID and Network Key
Setting Up Connection by Selecting a Wireless Router
Setting Up Connection by Specifying Detailed Settings
If the problem persists even after checking the network key, check whether the machine is properly installed and ready
to connect to the network.
Copying is restricted. Do you want to log in?
Copying is disabled in the Department ID Management.
Select <Yes> and log on with a Department ID for which copying is not disabled. For the Department ID and PIN,
contact your Administrator.
Setting the Department ID Management
Appropriate paper that is required for correction is not loaded in a paper drawer.
Load plain or recycled A4 or Letter size paper into the paper drawer.
Adjust Copy Image
An adjustment image that is required for correction is not placed on the platen glass correctly.
Place the adjustment image on the platen glass with the print side face down and the black stripe toward the back side
of the machine.
Adjust Copy Image
Paper jammed during correction.
Remove the jammed paper, and perform correction again.
The amount of toner required for correction is insufficient.
Corrections require toner. Replace the toner cartridge, and perform correction again.
Replacing Toner Cartridges
The transfer belt inside the machine is dirty.
Perform automatic cleaning of the transfer belt.
Could not connect using the wireless LAN. Turn the main power OFF and ON, then configure the settings
A connection failed due to an error while setting wireless LAN connection.
Restart the machine and set again.
If the problem persists even after restarting the machine, check whether the machine is properly installed and ready to
Downloaded from ManualsPrinter.com Manuals