Configuring Copy Settings to Your Needs
The default settings are the settings that are displayed whenever you turn ON the machine, or when you press
frequently used settings as default settings, you can eliminate the need to configure the same settings every time you make copies. In
addition, you can also register combinations of multiple copy settings and use them whenever you need them.
The machine comes pre-configured with factory default settings (
settings according to your needs.
Downloaded from ManualsPrinter.com Manuals
Setting Menu List). You can change and register the default
Change the copy ratio to 95% and register it as the default setting. From now on, you
can make copies without changing the copy ratio.
Go to <Favorite Settings> and register the combination of <2-Sided> and <Collate>
turned <On>. You can then easily use this setting combination whenever you need it.
Registering Frequently Used Copy Settings
. If you register your
Changing Default Settings