Scanning Using an Application
The application must be compatible with TWAIN or WIA . For more information, see the instruction manual for your application.
* TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is an integrated standard in
From the Operation Panel
Place the document(s).
The second or subsequent documents may not be scanned, or an error message may be displayed depending on the application.
In such a case, place and scan one document at a time.
to select <Remote Scanner>, and press
From a Computer
From the application, select the start scan command.
The procedure for selecting the start scan command varies depending on the application. For more information, see the
instruction manual for your application.
Select the scanner driver for the machine.
Select ScanGear MF or WIA. If you select ScanGear MF, you can configure advanced scan settings.
Configure the scan settings as necessary.
For more information about ScanGear MF scan settings, see
Scan Settings in Advanced Mode.
When scanning is complete, the scanned image is forwarded to an application.
Downloaded from ManualsPrinter.com Manuals
Scan the document by using an application. You can use Adobe Photoshop, Microsoft Office Word, or other
image-processing and word-processing applications. The scanned image is directly loaded in the application,
allowing you to edit or process the image immediately. The following procedure varies depending on the
Configuring Scan Settings in Simple Mode or