When placing documents on the platen glass
The screen shown below is displayed.
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and click [Next].
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
When scanning is complete, the scanned document is saved to a folder on the computer or forwarded to an
Configuring Settings for MF Toolbox and the Scanner
You can switch to another scanner by using the [Settings] button. You can also configure settings such as the name of the computer to
Select the scanner (machine) to use with MF Toolbox.
When scanning by using the operation panel of the machine, there is a procedure to specify a destination to save the scanned
Scanning from the Machine). You can edit the computer name that appears on the display of the machine during
You can enter a comment for each type of scan. Edit the comment as necessary.
[Close Toolbox after Finishing Scanning when Started from Device]
When you scan by using the operation panel of the machine, MF Toolbox starts. You can specify whether you want to
automatically close the MF Toolbox screen when you finish scanning.
Configuring Scan Settings in MF Toolbox
Downloaded from ManualsPrinter.com Manuals
Configuring Storing Settings
Specifying External Applications to Forward Scanned