Scanned data could not be e-mailed or stored to the shared folder because the LAN cable is disconnected.
Check whether the LAN cable is connected correctly.
Connecting to a Wired LAN
Scanned data could not be e-mailed or stored to the shared folder because TCP/IP was not working correctly.
Check <TCP/IP Settings>, and set correctly.
An IP address is not set.
Set the IP address correctly.
Setting IP Addresses
The machine cannot communicate with devices on a network immediately after the machine starts up because
the waiting time for the start of the communication is set.
The machine cannot start communicating immediately after it is turned ON. Wait until the set time for <Waiting Time
for Connection at Startup> passes after turning ON the machine, and send again.
Setting a Wait Time for Connecting to a Network
When communicating with an SMTP server to send an e-mail, a timeout error occurred from the server.
Check whether SMTP is running on the network correctly.
Check whether the machine is properly installed and correctly connected to the network.
When communicating with the SMTP server, an error returned from the server.
Check whether the SMTP server is set correctly.
A destination is not set correctly.
Check whether the destination is set correctly.
When storing a scanned document into the shared folder, an error occurred from the folder.
Check whether the shared folder and the computer that has the shared folder are running correctly.
The SMTP server name is not set correctly.
Set the SMTP server name correctly.
Configuring Basic E-mail Settings
Configuring Advanced E-mail Settings
No access privileges to access the shared folder are granted.
Downloaded from ManualsPrinter.com Manuals