Connecting via Wireless LAN (MF8580Cdw / MF8280Cw Only)
The machine and computer are connected via a wireless LAN router. A LAN cable is not required because wireless communications (radio
waves) are used to connect the machine and the router.
The machine does not come with a wireless LAN router. Have it ready as necessary.
The wireless router must conform to IEEE 802.11b/g/n and be able to communicate in 2.4 GHz bandwidth. For more
information, see the instruction manual provided with the router, or contact your manufacturer.
The machine cannot connect to both wired and wireless LANs at the same time. When using a wireless LAN connection, do not
connect a LAN cable to the machine. Doing so may cause a malfunction.
If using the machine in your office, consult your Network Administrator.
Check the device and network settings.
Check the router.
Check your router for a WPS button. The procedure will vary depending on whether or not the router has a WPS button.
Configure the wireless LAN settings.
See Wireless LAN Setting Guide or
wireless LAN settings.
If this screen is not displayed, press
Check that the settings have been completed properly.
Check the IP address.
Write down the IP address that is displayed.
Open a Web browser on the computer.
Enter "http://(the IP address of the machine)/" in the address field, and press the [ENTER] key.
If a Remote UI screen like the one shown here is displayed, a proper connection has been established.
Downloaded from ManualsPrinter.com Manuals
Have the computer and the router been connected properly? For more information, see the
instruction manuals included with the devices you are using, or contact the device
Have the network settings been completed on the computer? If the network has not been
set up properly, you will not be able to use the machine on the wireless LAN network, even
if you perform the rest of the procedure below.
Connecting to a Wireless LAN (MF8580Cdw / MF8280Cw Only) to configure the
Viewing Network Settings
<Wireless LAN Settings> to display it.