Specify the page layout settings such as binding position and margin values.
Select the binding position of the paper (along the long edge or the short edge). For 2-sided printing, image orientation is
automatically arranged to produce the correct layout.
When the binding position is on the long edge of the paper:
When the binding position is on the short edge of the paper:
You cannot create a binding margin with this setting alone. Use this setting in combination with the <Gutter> setting to set
the binding margin for the selected binding position.
Specify the binding margin to apply to the binding position selected in the <Binding Location> setting.
-50.0 to ±0 to +50.0 (mm)
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
Offset Short Edge (Front)
Specify the print position by setting the offset value for the short edge on the front side of the paper. Increasing the value moves
Downloaded from ManualsPrinter.com Manuals
in the illustrations below represent margins.
Specify the binding margin
Select <Long Edge> or <Short