Drags the image to move the visible part of the image when a preview image is enlarged.
Enlarges the entire preview image. Left-click the image to zoom in. Right-click the enlarged image to zoom out. To
enlarge a part of the image to check the details, use [Zoom] (
Rotates the preview image 90 degrees to the left or right.
Displays the current settings of the scanned image, such as the color mode and size of the scan area.
Automatically sets the cropping frame that fits the scanned document. Each time you click the icon, the cropping
frame is reduced.
(Clear Crop Frame)
Clears the selected cropping frame.
[Select All Crops]
Selects all of the cropping frames on the image.
Enlarges the image in the cropping frame. The smaller the cropping frame, the larger the image is displayed. You can
check the details that are difficult to see with
Specifying Settings for Documents and Color Mode
Specify the document input method (the platen glass or feeder), document size, color mode, and other settings.
[Original Input Method]
Select a setting based on whether you place your documents on the platen glass or in the feeder.
Specify the size of the scanning area. For normal cases, select the same size as the document. To specify the size
with values, select a unit, and enter the values for width and height. To lock the width to height ratio of the
If you select [ADF (2-sided)] for [Original Input Method] (
The image size that can be scanned is limited on some applications.
If documents are placed in the feeder, set the orientation of the documents in [Orientation]. You can also set
[Binding Location] if 2-sided documents are placed in the feeder.
Downloaded from ManualsPrinter.com Manuals
Select when placing documents on the platen glass.
Select when placing 1-sided documents in the feeder.
Select when placing 2-sided documents in the feeder.
). To return the image to its original size, click this button again.
), you cannot specify the size by entering the