3Com 4200G 12-Port Configuration Manual page 350

336 C 38: FTP
HAPTER AND
Configuration Example:
A Switch Operating as
an FTP Client
TFTP C
ONFIGURATION
Table 292 FTP client operations (Continued)
Operation
Query the specified
files
Query a specified
remote file
Download a remote file get remotefile [ localfile ]
Upload a local file to
the remote FTP server
Rename a file on a
remote host.
Switch to another FTP
user
Connect to a remote
FTP server
Terminate the current
FTP connection without
exiting FTP client view
Terminate the current
FTP connection without
exiting FTP client view
Terminate the current
FTP connection and
quit to user view
Terminate the current
FTP control connection
and data connection
Display the on-line help
on a specified
command concerning
FTP
Enable verbose
function
Network requirements
A switch and a remote PC operate as an FTP client and an FTP server.
Create a user account on the FTP server, with the user name being switch,
■
password being hello, and the permission to access the directory named Switch
assigned to the user account.
The IP address of a VLAN interface on the switch is 1.1.1.1. The IP address of the
■
PC is 2.2.2.2. And the route between the two is reachable.
Download the application named switch.bin from the PC to the switch and upload
the configuration file named vrpcfg.txt to the directory named Switch on the PC to
backup the configuration file.
Command
dir [ filename ] [ localfile ]
ls [ remotefile ] [ localfile ]
put localfile [ remotefile ]
rename remote-source
remote-dest
user username [ password ]
open { ip-address | server-name }
[ port ]
disconnect
close
quit
bye
remotehelp [
protocol-command ]
verbose
Description
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
The verbose function is enabled by
default.