3Com 4200G 12-Port Configuration Manual page 396

382 C 45: C
HAPTER ONFIGURATION OF
N A C F
EWLY DDED LUSTER UNCTIONS
# Display the current topology.
[chwn_0.S4200G-cluster]display cluster current-topology
--------------------------------------------------------------------
(PeerPort) ConnectFlag (NativePort) [SysName:DeviceMac]
--------------------------------------------------------------------
ConnectFlag:
<--> normal connect
???? lost device
--------------------------------------------------------------------
[chwn_0.S4200G:000f-e224-0562]
|
+-(P_1/0/4)<-->(P_1/0/3)[S4200G:000f-e224-0560]
|
+-(P_1/0/2)<-->(P_1/0/1)[S4200G:000f-e224-055f]
[chwn_0.S4200G-cluster]
# Display the current configuration.
[chwn_0.S4200G-cluster]display current-configuration
#
sysname S4200G
#
radius scheme system
#
domain system
#
acl number 3998
rule 0 deny ip destination 168.192.0.0 0.0.0.255
rule 1 permit ip source 168.192.0.0 0.0.0.255
acl number 3999
rule 0 deny ip source 168.192.0.0 0.0.0.255
rule 1 permit ip destination 168.192.0.0 0.0.0.255
#
vlan 1
#
cluster
ip-pool 168.192.0.1 255.255.255.0
build chwn
tftp-server 1.1.1.66
snmp-host 1.1.1.66
#
snmp-agent
snmp-agent local-engineid 800007DB000FE22405626877
snmp-agent sys-info version all
snmp-agent target-host trap address udp-domain 1.1.1.66 params
securityname clu
ster
undo snmp-agent trap enable standard
#
user-interface aux 0
user-interface vty 0 4
#
return
# Configure the read-community name to be aaa.
[chwn_0.S4200G-cluster]cluster-snmp-agent community read aaa
Member 1 succeeded in the read-community configuration.
Member 2 succeeded in the read-community configuration.
Finish to synchronize the command.
# Configure the write-community name to be bbb.
[chwn_0.S4200G-cluster] cluster-snmp-agent community write bbb
Member 1 succeeded in the write-community configuration.
Member 2 succeeded in the write-community configuration.
---> odd connect
++++ new device
**** in blacklist
-¦+- STP discarding